BKKWK - V-100 EPOXY GROUT JOINT FILLER FORMULA
- MSDS: BKKWK
- Manufacturer: AKEMI PLASTICS INC
- Product Name: V-100 EPOXY GROUT JOINT FILLER FORMULA
- National Stock Number: 8030-00N014242
Product Identification
Product ID:V-100 EPOXY GROUT JOINT FILLER FORMULA
MSDS Date:03/01/1990
FSC:8030
NIIN:00N014242
MSDS Number: BKKWK
Responsible Party
EATON RAPIDS, MI 48827
US
Emergency Phone: 517-663-8191
Info Phone: 517-764-6060
Cage: AKEMI
Contractor
Telephone: 517-764-6060
Cage: AKEMI
Ingredients
PHENOL, NONYL (NONYLPHENOL MONOALKYL )
CAS: 25154-52-3
RTECS: SM5600000
Fraction By Weight: 40-50%
AIR RELEASE AGENT
Fraction By Weight: 0-1%
OSHA PEL 50 PPM (MFR)
ACGIH TLV: 25 PPM (MFR)
SILICA GEL (FUMED SILICA)
CAS: 112945-52-5
RTECS: VV7310000
Fraction By Weight: 0-1%
OSHA PEL 6 MG/M3
ACGIH TLV: 10 MG/M3 TDUST
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 0-1%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9192
GLYCERIN
CAS: 56-81-5
RTECS: MA8050000
Fraction By Weight: 0-1%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 (MIST) 9293
SILICA, CRYSTALLINE - QUARTZ
CAS: 14808-60-7
RTECS: VV7330000
Fraction By Weight: 10-15%
OSHA PEL SEE TABLE Z3
ACGIH TLV: 0.1 MG/M3 RDUST;9293
KAOLIN
CAS: 1332-58-7
RTECS: GF1670500
Fraction By Weight: 0-5%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 2 MG/M3 TDUST; 9293
POLYOXYPROPYLENE AMINE
CAS: 9046-10-0
Fraction By Weight: 20-30%
PIPERAZINE, 1-(2-AMINOETHYL) (N-AMINOETHYLPIPERAZINE)
CAS: 140-31-8
RTECS: TK8050000
Fraction By Weight: 5-10%
EPON 820 (EPOXY RESIN)
CAS: 25068-38-6
RTECS: KC2100000
Fraction By Weight: 0-5%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYES:SEVERE BURNS, REDNESS, TEARING.
SKIN:SEVERE BURNS, DERMATITIS, IRRITATION, POSSIBLE SENSITIZATION.
INGEST:GASTROINTESTINAL IRRITATION, NAUSEA, VOMITING.
INHAL:BREATHING VAPORS CAN CAUSE NASAL AND RESPIRATORY IRRITATION.
MFR IDENTIFIESSKIN AS A ROUTE OF ENTRY.
Explanation of Carcinogenicity:SILICA, CRYSTALLINE-QUARTZ:GROUP 2A.
Effects of Overexposure:EYES:REDNESS, TEARING. SKIN:RASH, REDNESS.
Medical Cond Aggravated by Exposure:SKIN:CONTACT DERMATITIS.
First Aid
First Aid:SKIN:WASH THOROUGHLY W/SOAP & WATER, CALL MD. EYES:FLUSH
W/WATER FOR AT LEAST 15 MINUTES, CALL MD. INHAL:REMOVE TO FRESH
AIR. SUPPORT BREATHING (GIVE O*2/ARTIFICIAL RESPIRATION), CALL MD .
INGES T:CALL MD IMMEDIATELY .
Fire Fighting
Flash Point Method:SCC
Flash Point:>200F,>93C
Extinguishing Media:WATER, CARBON DIOXIDE FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:ABSORB ON INERT SORBENT AND SHOVEL INTO DRUMS.
REMAINING MATERIAL MAY BE EMULSIFIED W/SOAP & WATER & ABSORB ON
ADDITIONAL SORBENT. DO NOT FLUSH IN SEWER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID PRLNGD/RPTD INHALATION OF VAPORS
& SKIN CONTACT. STORE IN DRY AREA AWAY FROM HEAT. CORROSIVE LIQUID.
DO NOT EAT, DRINK, SMOKE WHILE USING PROD.
Other Precautions:FOLLOW ALL PRECAUTIONS CONTAINED ON MSDS WHEN
PERFORMING MAINTENANCE OR NON-ROUTINE OPERATIONS ON EQUIPMENT OR
CONTAINERS WHICH CONTAIN OR HAVE CONTAINED THIS MATERIAL.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR FOR ORGANIC
VAPORS.
Ventilation:LOCAL EXHAUST TO MAINTAIN EXPOS LEVELS BELOW PEL.
MECHANICAL EXHAUST ALSO RECOMMENDED.
Protective Gloves:IMPERVIOUS TYPE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:LONG SLEEVED AND LONG LEGGED CLOTHING.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER USE AND BEFORE
EATING, DRINKING, SMOKING OR USING SANITARY FACILITIES .
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Spec Gravity:1.7
Solubility in Water:SLIGHT
Appearance and Odor:BLACK THIXOTROPIC LIQUID, AMMONIACAL ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO*2, CO AND NO*X.
Conditions to Avoid Polymerization:WITH EPOXY RESINS IN UNCONTROLLED
CONDITIONS OR WHEN EXPOSED TO TEMPERATURES ABOVE BOILING POINT.
Disposal
Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE AND FEDERAL
REGULALTIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.